Light Source: LED
Item Type: Flood Lights
LED Light Source: COB
Input Voltage(V): AC85-265V
Lamp Power(W): 1
Lamp Luminous Flux(lm): 15
Lamp Luminous Efficiency(lm/w): 1
CRI (Ra>): 2
Color Temperature(CCT): Cool White
Beam Angle(°): 120 Degree
Working Temperature(℃): -10 – 40
Working Lifetime(Hour): 4
Lamp Body Material: ABS
IP Rating: IP67
Certification: CE, RoHS
Place of Origin: Zhejiang, China (Mainland)
Brand Name: Buffalo
Model Number: Buffalo Led light kits
TWO LIGHT SOURCE: RED ,WHITE
You can eaisly change light source between red and white by
HOW TO USE LIGHT
1.Press and hold the power button for 2s to turn on the light.
2.Press the power button to cycle through following 5 modes and then stay
on your wanted mode.
3.Press and hold the power button for 2s to turn off the light.
INSTALL THE LIGHT
Installation Mode 1: ABOVE THE SKATEBOARD
Installation Mode 2: UNDER THE SKATEBOARD
Please refer to the instructions for specific installation methods.
1.Skateboard Lights are very powerful lighting systems. Always take care
when operating. Do not look directly into the light. This may cause
serious injuries, Do not shine directly at others eyes.
2.Keep out of reach of children or pets.
3.Never dispose of the light in a fire.
4.Please do not use the light while charging or touch the light with wet hands.
5.Water resistant is for the rain only.
What will you get?
One Led Light With 5 Kinds Of Lighting Mode.
One Fixed Bracket Especially For Skateboards.
One USB cable.
Two Screw M5-45 X 2
One User Guide.
Make sure this fits by entering your model number.
✅SUPER BRIGHT TO KEEP YOU SAFE ： The Light with a micro-COB chips(Super energy saving and bright), produces an extraordinarily 210° wide-beamed of light which is eye-catching from all angles. Featured with 5 different modes ,which highly improving your visibility in the dark ,and get noticed on the road.
✅EASY TO INSTALL AND TAKE OFF： （Under The Skateboard）The bracket is screwed onto the bridge frame of the slide plate. Then clip the LED lamp on the bracket. （Above The Skateboard）Match gaskets and screw the bracket. Then clip the LED lamp on the bracket. Note：Please mount it properly. The Light should not exceed the deck after mounted, to avoid crash.
✅MULTIPURPOSE TAIL BIKE LIGHT： Such as handlebar, the back of a helmet, even your body, you don’t just have to be riding a skateboard to use this light – you could be out jogging or walking at dusk and you’ll be seen from a great distance, kill two birds with one stone.
✅USB RECHARGEABLE： Save your money on batter, give you a good running time, just 2 hours charged time and automatic fully charged cut-off system, built in lithium battery, with environmentally friendly features, run time up to 4 hours.
✅COMMODITY CONTENT： Led Light*1, Fixed Bracket*1, USB Cable*1, Washers*2, User Guide*1, Screw M5-45 *2 LED lights specially designed for skateboards. We are committed to improving the customer’s shopping experience with our service.