– Hardware: V 6.6
– Firmware: Latest firmware version
– Voltage: 8V – 60V (Safe for 3S to 12S LiPo) for the dual ESC
– Voltage spikes may not exceed 60V
– Current: Continuous 100A single, total 200A , Instantaneous current 400A per single, total 800A for system instantaneous current.
– 5V 1.5A output for external electronics for single
– 3.3V 1A output for external electronics for single
– Modes: DC, BLDC, FOC (sinusoidal)
– Supported sensors: ABI, HALL, AS5047
-Size: 78x78x20mm including heatsink
Reminder: Detected battery voltage tolerance: +/-0.6V
Make sure this fits by entering your model number.
Pro switch version: Power on/off by pressing the button
Added Can bus connector, be more convenient for 4WD set up
Changed the USB port soldering process to SMT soldering instead of manual soldering
Changed the big capacitors to SMT mounting capacitors ,and add more mosfets in the bottom side.