Advanced Features
1.Dual ESC can reach continuous 200A big current, give your board strong power
2.One PCBA board integrate two FSESC6 ’s function by internal CAN BUS circuit connection.
3.The mater and slave board connection can be Switched On/Off
4.Preserve Bluetooth module and RF module connections for both master and slave board
5.Aluminum anodized Heat sink with fins design for better heat dissipation
6.Compact size with heatsink: 120x91x20mm (L*W*D)
7.PCB layers: 8layers, thickness: 3oz/layer, total 24 oz thickness
Specification:
Hardware: V 6.6
Firmware: compatible with ESC_default_no_hw_limits
Voltage: 8V – 60V (Safe for 3S to 12S LiPo) for the dual ESC
Voltage spikes may not exceed 60V Current: Continuous 100A single, total 200A , Instantaneous current 400A per single, total 800A for system instantaneous current.
5V 1.5A output for external electronics for single
3.3V 1A output for external electronics for single
Modes: DC, BLDC, FOC (sinusoidal)
Supported sensors: ABI, HALL, AS5047
6 shunts in dual system. Each is measurable for the current.
Other Features:
Regenerative braking
Traction control (single and dual settings)
Sensor or sensorless operation
Configurable RPM, Current, Voltage and Power Limits
Input source: PPM, simulation, NRF Nyko Kama Nunchuck
Communication ports: USB, CAN, UART, NRF, Bluetooth
Throttle curves and ramps for all input sources
Separate acceleration and brake throttle curves
Motor speed, ampere hours, watt hour count,Instant data analysis and reading via communication port
Voltage and current protection setting for Motor and ESC
If there are any question or need help , just feel free contact us , we will always here help you out within 24 hours
Make sure this fits by entering your model number.
【200A big current 】Dual ESC can reach continuous 200A big current, give your board strong power
【One PCBA board】One PCBA board integrate two FSESC6 ’s function by internal CAN BUS circuit connection
【Switched On/Off】The mater and slave board connection can be Switched On/Off
【master and slave board 】Preserve Bluetooth module and RF module connections for both master and slave board
【Top Service】If there are any question or need help , just feel free contact us , we will always here help you out within 24 hours
Reviews
There are no reviews yet.