fbpx

Goolsky FLIPSKY FSVESC V4 50A SK8-ESC w/ 5V/1.5A BEC for Electric Skateboard RC Car E-bike E-scooter Robot

Amazon.co.uk Price: $55.59 (as of 22/09/2020 08:52 PST- Details) & FREE Shipping.

50A continous current, 240A peak current.
Built in 5V BEC, Voltage: 8V – 60V (3s to 13s LiPo), suit for electric longboard/RC Car/E-bike/E-scooter.
Based upon the VESC Open Source Project, and compatible with VESC Software.

Category:

The Flipsky ESC is based upon the VESC Open Source Project, and compatible with VESC Software. It is a highly modifiable electronic speed controller designed with DIY Electric Skateboards conversions in mind. Our ESC ships to you tested multiple times during the production cycle and are ready to use. The ESC will provide optimum performance when configured for your particular motor and battery voltage.

Features:
Continuous current up to 240A for a few seconds or 50A continous.
Built in 5V BEC, Voltage: 8V – 60V (3s to 13s LiPo), suit for electric skateboard/RC Car/E-bike/E-scooter
Based upon the VESC Open Source Project, and compatible with VESC Software.
Allows you to use sensorless motors to achieve smooth start-up from a stop versus traditional RC ESC’s which may have trouble starting from a complete stop.
Providing strong reliable and progressive electric braking.
You can connect your ESC to your computer and modify them using the VESC BLDC Tool.

Specifications:
Item Brand: FLIPSKY
Item name: V4 50A SK8-ESC
Application: For electric skateboard/RC Car/E-bike/E-scooter
Motor supported: sensor & sensorless brushless motor
Hardware: V4.12
Firmware: V3.38
Amps: 50A continuous / 240A peak
Cells: 3-13S LiPo
Voltage: 8V-60V
BEC: [email protected]
BEC type: Internal driver support
Timing: Software calibration
Cutoff voltage: Programmable
Frequency: PWM input
Governor: No
Programming card: No
Reverse: Yes
Size: 60 * 40 * 20mm

Note: There could be a few deviations due to manual measurement, thank you

Package information:
Package size: 21 * 15 * 4cm / 8.26 * 5.9 * 1.57in
Package weight: 124g / 4.37oz

Package included:
1 * 50A SK8-ESC
1 * Manual

50A continous current, 240A peak current.
Built in 5V BEC, Voltage: 8V – 60V (3s to 13s LiPo), suit for electric longboard/RC Car/E-bike/E-scooter.
Based upon the VESC Open Source Project, and compatible with VESC Software.
Sensored and sensorless (FOC) Field Oriented Control allows your electric skateboard to run with barely any motor noise.
Many safety features such as current control and temperature control features.

Brand

Reviews

There are no reviews yet.

Be the first to review “Goolsky FLIPSKY FSVESC V4 50A SK8-ESC w/ 5V/1.5A BEC for Electric Skateboard RC Car E-bike E-scooter Robot”

Your email address will not be published. Required fields are marked *